Ghetto Uli Thing

[Godsize]

Since jelqing isn't doing much for me, I was thinking of trying extreme uli's with a ponytail hairband. It's ghetto, but will it work just as good? Someone else had posted about it and it piqued my interest since my cock does not reflect the amount of time and work that I put into it over the past year. I need to try something else to gain the size I crave.

Would this be a good idea?

[seven_wants_ten]

Could you get it on there tight enough?

[Godsize]

I dunno. I'm gonna find the plans and build a real Uli thing soon.

[REDZULU2003]

I think it would work.

[doublelongdaddy]

There are instructions at Thundersplace on how to make a uli-thing. If I remember right it looks pretty easy and inexpensive. I'd give you a link but you know how that goes.

[maxwell]

Originally posted by doublelongdaddy
There are instructions at Thundersplace on how to make a uli-thing. If I remember right it looks pretty easy and inexpensive. I'd give you a link but you know how that goes.

Here you go Godsize. They had pictures on how they made it for what reason I dont know. They may have took them down. But you may want to check.

http://tugahoy.com/bona_constrictor_cock_ring.htm

Here's the place on Thunder that lets you build one cheap!

http://www.thundersplace.com/forum/showthread.php?s=&threadid=9014

I will post more if I find it.

[stillwantmore]

This is the version I came up with. DO NOT order the tugahoy site version. You can make the same thing for less than a $1. Dude would of course love to sell you one for $70 after shipping! I made this from a black "zip tie". The ones that are about 3/16" wide and 14" or so long. The outer tubing is 1/4" diameter clear, vinyl hose ...CHEAP too! Just cut everything to size. You have to experiment with fit and everything. I recommend using a piece of cloth under the lock part of the zip tie to cushion your skin from it. To get a close up of how to cut the zip tie (you MUST cut it or you will not be able to get it off!) go to the tug ahoy site via the url listed above. The guy actually shows you how to cut it via a close up. Test the zip tie before putting it on to make sure it releases easily. The way it should work (before putting it on) is...it should stay 'locked' when pulling on the tie laterally. But, it should release easily when you pull upward and push in on the end of the zip tie.