Page 2 of 33 FirstFirst 123412 ... LastLast
Results 21 to 40 of 660
  1. #21
    Join Date
    Dec 2003
    Posts
    8,681
    Post Thanks / Like
    Blog Entries
    2
    Rep Power
    23

  2. #22
    Join Date
    Jun 2003
    Location
    Back in K-Town
    Age
    32
    Posts
    1,912
    Post Thanks / Like
    Rep Power
    16

    Re: Hard core hanging

    Yeah, I'm going back and forth with 20 and 25lbs.. Some days I can do 25, some I can't. Hopefully I'll see gains soon. I've been doing this consistently for almost two weeks now. I'm proud of myself.

    -ItsElectric
    After all of my claims of coming back.. I might actually, be back.


  3. #23
    Join Date
    Feb 2004
    Location
    Southern USA
    Age
    42
    Posts
    137
    Post Thanks / Like
    Rep Power
    14

    Re: Hard core hanging

    Any skin burning to go with those sudden increases in weight? I sometimes do what I call a "shock routine" and it really is demanding on the skin etc. I've been hanging a while and know how to wrap,so I don't need any wrapping instructions.
    Rich

  4. #24
    Join Date
    Dec 2003
    Posts
    8,681
    Post Thanks / Like
    Blog Entries
    2
    Rep Power
    23

    Re: Hard core hanging

    Quote Originally Posted by ItsElectric
    Yeah, I'm going back and forth with 20 and 25lbs.. Some days I can do 25, some I can't. Hopefully I'll see gains soon. I've been doing this consistently for almost two weeks now. I'm proud of myself.

    -ItsElectric

    How is this working?

  5. #25
    stillwantmore Guest

    Re: Hard core hanging

    Bump!

  6. #26
    Join Date
    Nov 2003
    Posts
    48
    Post Thanks / Like
    Rep Power
    0

    Re: Hard core hanging

    Dashdeming- Any details on your hanger design? I have made a few but cannot hang over 15lb comfortably.

  7. #27
    stillwantmore Guest

    Re: Hard core hanging

    Quote Originally Posted by trigger
    Dashdeming- Any details on your hanger design? I have made a few but cannot hang over 15lb comfortably.
    What type of hangers have you made so far trigger? Have you made a modified BIB yet? I used to use one of those before the production pieces became available and could hang over 15lbs. Maybe your penis just isnt ready for beyond 15lbs yet? That could be another possibility. It took me several months to go from 15lbs to 17.5lbs.

  8. #28
    Join Date
    Nov 2003
    Posts
    48
    Post Thanks / Like
    Rep Power
    0

    Re: Hard core hanging

    Is the modified Bib good?, thats the one with the PVC tube and the other tube with a V-notch, right? I may give it a go. I made one similar to the Uli type bib hanger which didnt work too well on me.
    My first was 2 steel plates with 4 nuts and bolts. My latest was a hinged metal one with 2 nuts and bolts. I have tried some with PVC pipe but it flexed too much. I glued some sandpaper to the metal ones which is amazing for gripping the wrapping material.

    I also use a cable clamp with a weight looped which is good up to 5lb. I have made a tugger which is good up to about 4lb but have hung 10lb for a few minutes with it too. I love the tugger as it stretches the full length.

    I also think my problem may be too little clamping area, Bib said the commercial bib is 3" long, my biggest was 2-2.5". Bib said he has used ones up to 4.5" long! If only I had that much to spare! He also said he hung 60lb for a short time with the commercial Bib hanger.

    I think I am ready for the weight, it is only sore at the clamping point. I can manually stretch what feels like far more than 15lb but just can't hold it long enough. I have been Penis Enlargementing for about 9 months now.
    Last edited by trigger; 05-11-04 at 07:06 AM.

  9. #29
    stillwantmore Guest

    Re: Hard core hanging

    You REALLY need to read my sticky threads at the top of this forum before you injure your dick. The home made bibs are more than 'pretty good' , theyre one of the best options you can have for a home made hanger, and the easiest to make. They are made from a clear nylon hose with braided nylon cord molded through it. The stuff is supposed to flex some. It's described in detail in THIS THREAD.

  10. #30
    Join Date
    Sep 2003
    Posts
    93
    Post Thanks / Like
    Rep Power
    14

    Re: Hard core hanging

    Dash,
    In the earlier posts you said you constructed a hanger, can you further elaborate on this?

  11. #31
    Join Date
    Jun 2003
    Posts
    52
    Post Thanks / Like
    Rep Power
    15

    Re: Hard core hanging

    The science behind plastic deformation shows that duration rather than load is the most important. However, 40% of a tendons maximum load bearing capability has been shown to be optimal for plastic deformation, and I know of no reliable data we can extrapolate this into actual weight for hanging - I'd expect it to be quite a lot....more weight than is commonly used in hanging.

  12. #32
    Join Date
    May 2004
    Location
    Southern New England
    Posts
    107
    Post Thanks / Like
    Rep Power
    14

    Re: Hard core hanging

    It's Electric

    How 'bout, don't rip it off. :D

  13. #33
    stillwantmore Guest

    Re: Hard core hanging

    I put off getting into this until a few days ago because I knew I'd have to change my hanger settings to accommodate the higher weights. I ended up moving the bottom adjustment nuts out a few turns each. Made a big difference for me. I had two very intense 20 minute sets last night with 25lbs! Thats the heaviest I've gone so far, but I like it.

  14. #34
    Join Date
    Apr 2004
    Location
    UK
    Posts
    231
    Post Thanks / Like
    Rep Power
    14

    Re: Hard core hanging

    Quote Originally Posted by stillwantmore
    I put off getting into this until a few days ago because I knew I'd have to change my hanger settings to accommodate the higher weights. I ended up moving the bottom adjustment nuts out a few turns each. Made a big difference for me. I had two very intense 20 minute sets last night with 25lbs! Thats the heaviest I've gone so far, but I like it.
    So you found the grip more comfortable for higher weights with the bottom nuts adjusted out a little.

    Did you find that you needed to tighten the top nut up much more to stop the hanger sliding too far forward during your hanging set?

    That is what has always worried me about hanging, having to tighten the hanger too much. I am afraid of damaging my penis by squashing it.

    On another note SWM, are you still wearing the golf weights, any good?

  15. #35
    Join Date
    Jun 2003
    Location
    USA
    Age
    56
    Posts
    1,622
    Post Thanks / Like
    Rep Power
    16

    Re: Hard core hanging

    Quote Originally Posted by inamo
    Dash,
    In the earlier posts you said you constructed a hanger, can you further elaborate on this?
    Sorry it took so long to respond. I have been asked many times for this info so I copied a reply from a PM for you. Take a look and ask questions if you need to. I still need to take some pictures and I will do that as soon as I get another digital cam. Good luck and be careful!

    Re: Your Custom Hanger??

    --------------------------------------------------------------------------------

    Quote:
    Originally Posted by shism2
    How did you make your hanger???? I also want to know how you hang... You just put the weight on the hanger and just let he penis fall and hang downwards??


    Ok, to construct the hanger:
    Buy a schedule 80 2" PVC coupler. Cut the coupler axially into 1/3 pieces and discard on piece. Buy a short stick of 3/4"X3/4" sst angle iron. Cut 4 pieces of angle iron to 1/4" shorter than the 2" coupler. Bend the 4 angle iron pieces from the 90 degree angles to about 135 degress.Clamp the angles axially to the outside edges of the 2 couplers and then drill three 3/16" holes through the angle and coupler. Do this to all four edges. Get 3/16" sst pop style rivets that are about 1/2" long and set them tightly from the concave side. This will give you two pieces of PVC with two angles on each that, when held together, form a clamp with the angles reasonably parallel to each other. Clamp the two halves together and then drill two holes in each side. Get machine screws (start with 3" long and trim to suit your size) with washers and wing nuts. Put these through the holes to allow sizing anf tightening. Next step is to get a 12" piece of strapping and rivet one end to the forward edge of each half of the clamp and in the pvc. Remember to insert and set the rivet from the concave side. Last step is to buy a dense foam rubber kneepad or similar material and cut two pieces to fit into the concave side of each clamp half. Rivet this in place using washers too so that the padding does not move. I also used polyurethane to glue this into the clamps. Now you are ready to hang.

    I used a heating pad to warm up then wrapped with ace type material that is self sticking. You choose where to place the clamp but I placed mine about mid-way of my shaft and left about 1 1/2" in front. Adjust the clamp to your taste so that you are comfortable. Also, the gaps should be vertical so you are not clamping on your nerves along the top of your penis. When you are happy with the clamp you can then apply weight as you wish. I sit in a chair and rock back sort of on my back and use a straight out pulley arrangement with weight at the end. This allows me to work and surf while hanging. I never hang more than 20 minutes at a time but sometimes I hang 2 times per day. Good Luck!
    __________________
    "I have never lived this long before" - Dash

  16. #36
    stillwantmore Guest

    Re: Hard core hanging

    Quote Originally Posted by bluenun
    So you found the grip more comfortable for higher weights with the bottom nuts adjusted out a little.

    Did you find that you needed to tighten the top nut up much more to stop the hanger sliding too far forward during your hanging set?

    That is what has always worried me about hanging, having to tighten the hanger too much. I am afraid of damaging my penis by squashing it.
    The BIB hangers are designed to be used very tightly. There are grooves and channels molded into the hanger insides that allow for blood flow with the hanger tight.

    On the nuts. For me yes. Moving out the bottom adjustment nuts allows the penis to be put farther down into the hanger....you want to be as far down in the hanger as you can be anyway. It's hard to explain. You just have to have a BIB and know the user guide well enough to understand what I'm talking about. There's not really such a thing as tightening a BIB hanger "too much". You want it tight enough so that it will anchor itself where it should when hanging. If you have it set up properly, there wont be any problems with it moving during hanging. Again, you just have to have a BIB to know what I'm talking about.

  17. #37
    Join Date
    Sep 2003
    Posts
    93
    Post Thanks / Like
    Rep Power
    14

    Re: Hard core hanging

    Quote Originally Posted by Dashdeming
    Sorry it took so long to respond. I have been asked many times for this info so I copied a reply from a PM for you. Take a look and ask questions if you need to. I still need to take some pictures and I will do that as soon as I get another digital cam. Good luck and be careful!

    Re: Your Custom Hanger??

    --------------------------------------------------------------------------------

    Quote:
    Originally Posted by shism2
    How did you make your hanger???? I also want to know how you hang... You just put the weight on the hanger and just let he penis fall and hang downwards??


    Ok, to construct the hanger:
    Buy a schedule 80 2" PVC coupler. Cut the coupler axially into 1/3 pieces and discard on piece. Buy a short stick of 3/4"X3/4" sst angle iron. Cut 4 pieces of angle iron to 1/4" shorter than the 2" coupler. Bend the 4 angle iron pieces from the 90 degree angles to about 135 degress.Clamp the angles axially to the outside edges of the 2 couplers and then drill three 3/16" holes through the angle and coupler. Do this to all four edges. Get 3/16" sst pop style rivets that are about 1/2" long and set them tightly from the concave side. This will give you two pieces of PVC with two angles on each that, when held together, form a clamp with the angles reasonably parallel to each other. Clamp the two halves together and then drill two holes in each side. Get machine screws (start with 3" long and trim to suit your size) with washers and wing nuts. Put these through the holes to allow sizing anf tightening. Next step is to get a 12" piece of strapping and rivet one end to the forward edge of each half of the clamp and in the pvc. Remember to insert and set the rivet from the concave side. Last step is to buy a dense foam rubber kneepad or similar material and cut two pieces to fit into the concave side of each clamp half. Rivet this in place using washers too so that the padding does not move. I also used polyurethane to glue this into the clamps. Now you are ready to hang.

    I used a heating pad to warm up then wrapped with ace type material that is self sticking. You choose where to place the clamp but I placed mine about mid-way of my shaft and left about 1 1/2" in front. Adjust the clamp to your taste so that you are comfortable. Also, the gaps should be vertical so you are not clamping on your nerves along the top of your penis. When you are happy with the clamp you can then apply weight as you wish. I sit in a chair and rock back sort of on my back and use a straight out pulley arrangement with weight at the end. This allows me to work and surf while hanging. I never hang more than 20 minutes at a time but sometimes I hang 2 times per day. Good Luck!
    __________________
    "I have never lived this long before" - Dash
    Any pictures? it may be just me but your explanation put me in the same position as a blind monkey in the dark.

  18. #38
    Join Date
    Jun 2003
    Location
    USA
    Age
    56
    Posts
    1,622
    Post Thanks / Like
    Rep Power
    16

    Re: Hard core hanging

    I am being asked a lot by newer users regarding my "Hardcore Hanging" style that I have been using for the last 16 months so I wanted to bump this thread up for easy find.

    Remember guys, this is not for new hangers. You must work your way up tp these big weights so you don't hurt yourself. Be carefule!!

  19. #39
    Join Date
    Jun 2003
    Location
    USA
    Age
    56
    Posts
    1,622
    Post Thanks / Like
    Rep Power
    16

    Re: Hard core hanging

    I hung 42 pounds for 20 minutes this morning!!! For some reason after I took the hanger off I got really, really hard almost like some sort of reaction. Talk about feeling awesome!!!!

  20. #40
    Join Date
    May 2004
    Location
    Sydney, Australia
    Posts
    96
    Post Thanks / Like
    Rep Power
    14

    Re: Hard core hanging

    42 pounds!! DAMN!
    What kind of gains are you making Dash?

Page 2 of 33 FirstFirst 123412 ... LastLast

Tags for this Thread

1 inch, 2 inches, 7 inches, 8 inches, 9 inch, 9 inches, accomodate, according, account, adjust, advanced, advice, aesthetic, allows, angle, angled, apart, approaches, approximately, argi, asia, asian, average, bars, base, base girth, basically, bath, bearing, beginner, bend, bib hanger, big penis, black, blood, body, bolts, bone, break, brief, broken, btc, capacity, cement, cheap, cialis, circuit, circulation, cold, conditioned, condom, confused, contact, corresponding, cost, creases, creep, crossed, cum, cut, damage, deal, delete, device, diet, directly, disagree, dld blasters, doublelongdaddy, downwards, easy, effective, electrical, encourage, erect, erection, erection quality, erections, exercise, exercises, extending, extreme, fairly, farther, fast, faster, fat, fat pad, feat, first routine, flaccid, folding, formula, free, fri, gain, gains, gear, genetics, ging, girlfriend, glans, goal, goals, grams, grower, growth, guy, gym, hands, hang, hanging, happier, hard, hardcore, harder, harness, head, healing, health, heavy, help, hijack, homemade, https, huge, huge cock, improve, inc, increase, increasing, injury, inner penis, inspiration, instead, intense, intermediate, ios, ironwill, isolate, i´m, jelqs, journey, length gain, length gains, length master, live, load, loads, low, manual, master, mate, meant, messi, money, motivation, muscle, neeed, nerve damage, new to hanging, newbie routine, nor, normal, normally, numb, obviously, opposite, options, overlap, overnight, p.e, pad, painful, par, patience, pay, penis, penis growth, penis hanger, penis stretching, perfect, perma, permanent, peyronies, phallosan, pinching, placed, pogzee, pos, posts, powerful, pressed, pressure, product, program, progress, prototype, provides, pump, pumping, pussy, python, quality, questio, question, quick, quick gains, ranges, recommend, recovery, regarding, relatively, rem, research, restriction, results, routine, safe, secret, semester, sex, short, shower, shrink, simple, site, skin, sleeve, sleeves, snakehanger, sometime, stealth, stimulation, stock, stories, stretch, stretched, stretcher, stretching, stretchy, study, success, suction, suggestions, supplement, support, surgery, tend, tender, tension, theoretical, theory, theroy, thick, thirty, throughout, tight, time, tio, tool, trying to, twelve, uncircumcised, unfortunately, uniform, ups, usable, vacuum, warm, water, weight, wether, whomever, wide, wondered, wor, workout, wrap, youknowme123321

View Tag Cloud

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •