Results 1 to 13 of 13
  1. #1
    Join Date
    Aug 2016
    Location
    UK
    Posts
    26
    Post Thanks / Like
    Rep Power
    0

    Bib starter vs. MaleHanger & Hanging advice Please

    Not trying to start a war.

    I've seen malehanger's vids on wrapping and putting on his device. The inside of the device doesn't have those plastic moldings protruding out that the Bib starter has and is a smooth surface. Also, not a lot of wrap was applied and the device was put on.

    I am a novice on compression hanging. I was using the LG Vac hanger but it just really fucking sucks with all the blisters and shit. Especially the low ceiling on weight/progression and ridiculous amount of money you have to spend on that fucker.

    Anyways, back on track. When I was using my Bib starter a LONG time ago, I was not wrapping too much and have read that the Bib requires a good amount of wrap. Is that what differs with the malhanger?

    I also had trouble playing around with the bottom hex nuts to properly adjust the hanger to my size, but then again, my technique overall was really bad.

    I had to reorder my Bib starter, but am interested in the male hanger because it seems it does not require an insane amount of wrap. Thing that concerns me is of that smooth looking surface. I am assuming that the outer wrap creates some sort of traction that disallows any slippage. My problem is that I am uncut and experienced a lot of slippage, due to really bad technique.

    Assuming that the wrap is good as well as the bottom hex nut adjustments, all that is needed is to form those "shoulders" and then tighten right? If I were to get a malehanger, stillwantmore, if you read this, getting advice is possible right seeing that you are pretty active on these forums. I would appreciate it as well as everybody else.

    The LG is going in the trash. Fuckin piece of shit. Goin on PEGYM and gonna give em shit. Lol. Nah, just gonna leave some of the issues I had or may not even bother.

  2. #2
    Join Date
    Sep 2006
    Location
    TN
    Age
    39
    Posts
    4,976
    Post Thanks / Like
    Rep Power
    20

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    I'm going to reply based on my own personal experiences with hanging and the mentioned devices. I have in fact used just about every type of device out there over the years. The "LG" is nothing new design wise. The "Grip" hanger was similar in concept as was the "Max Vac". The LG appears to be a refined (whether it is actually "hand turned on a lathe by a skilled machinist" or not) version of the Max Vac. You usually need less wrap with the BIB Starter because the gel liner adds some faux girth. The BIB starter has issues with making the penis twist inside of it at weights over 12-15lbs.

    Coincidentally, this is the weight level most men start to see gains. The twisting comes from the gel liner from what I have been able to determine. The gel liner is in my mind like a lubricated condom. Imagine trying to get a tight grip with your hand on your erection with a lubricated condom on. It's not happening. Your grip with slip and twist. BIB of course has the solution. You start with the aptly named "Starter". Then, when you have some experience under your belt, you come back and give him some more money for his "Hardcore". For the bigger girthed guys (6" and over) he has his "Regular".

    I'm not being cynical, it's called a business model and marketing. I love capitalism too, I just choose to in my mind, run a more honest business.

    I designed my Malehanger to be usable by most men regardless of where they are starting. I don't sell you one hanger, then have you come back for another one later for more money. In fact, I have shipped several free hangers over the years when orders were either lost in transit, or the customer misused his hanger. I also give a 50% discount to active military and veterans with proof of service. The inner design of my hanger eliminates the uncomfortable pressure points in the BIB hangers. Proper wrapping and hanger adjustment help with proper grip. As does hanger placement. Men who will actually email me when they do have a problem, I can usually help. Hard headed types who refuse to come to me for help and just voice their negative opinion online about me or my hanger are the guys who don't come to me for help. We have one of those types here on MOS.

    I have even gone so far as to give the occasional refund when I could not get a guy to work with my hanger. You won't find the same level of customer service elsewhere and I'm not just tooting my own horn.

    I do indeed make myself pretty easy to reach. malehanger@gmail.com or here on MOS.
    Last edited by stillwantmore2; 05-17-17 at 06:15 AM.
    Likes megamike liked this post

  3. #3
    Join Date
    Jun 2003
    Location
    New England
    Age
    50
    Posts
    92,922
    Post Thanks / Like
    Blog Entries
    176
    Rep Power
    10

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    Bib has nothing on Stillwantmore's hanger, nothing! The side by side comparison should be enough but if that is not enough, the price should make you jump.
    Matters of Size
    SRT

    Suppressed-Restricted-Transposition

    The World's Best Penis Enlargement Routine
    based on 11 Years of Research
    !

    Four Easy Steps to Starting SRT
    and Making the Fastest Penis Size Gains Possible


    1. Get The Matters of Size Maximum Gains Package
    Learn All Penis Enlargement Exercise through Video!

    2. Get The All New Length Master Penis Stretcher and Hanger
    The Most Advanced Penis Stretcher and Hanger in the World!

    3. Get The SizeGenetics Penis Extender Complete Package
    (61% Off!)
    Learn how Important the SizeGenetics Extender is to growth and healing!
    Take advantage of ALL DAY PENIS STRETCHING

    4. Get a Bathmate HydroMax X20, X30, X40 or X50 Penis Pump! with FREE SHIPPING IN THE US!
    Realize Instant Usable Penis Size! Perfect for Penis Girth and Length Expansion!
    Hydro Penis Pumps have become a Massive Tool in Penis Size Gaining and Healing!

    5. Get the Phallosan The All Day and All Night Stretcher Now $100 in extras!

    6. Follow the SRT Routine: Maximizing Gains and Healing Fastest!
    Watch your Penis gain inches in girth and length in the FASTEST time Possible!
    Over 15 Years of Research, utilizing the most effective Penis Enlargement techniques!
    ONLY AT MOS - ALL PRODUCTS HAVE A 5 YEAR WARRANTY!
    Likes jekyllnhyde360 liked this post

  4. #4
    Join Date
    Aug 2016
    Location
    UK
    Posts
    26
    Post Thanks / Like
    Rep Power
    0

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    Hmmmm... I can see your point. I do see the gel becoming a problem with slippage.

    I also do not like those plastic niches portruding out. But it does seem to help with the idea of creating more girth inside the well.

    Just to reiterate my question. One thing that I WASN'T doing with the Bib hanger was tightening and pushing to form those shoulders or anchor spot whatever you folks call it. That is probably the main contributor to my injury.

    My erect girth right now stands at 5.0 inches and is a little thinner behind the coronal ridge. Will I be able to use the same amount of wrap as you? Or would I have to use more? With the Malehanger of course.

    Also, like I have previously mentioned, I am uncut and am wondering if I can use your method without the slippage issues I had with bib. Of course, just about everything was wrong when I was using it but visually seeing the malehanger and how it was applied, it seems like a more comfortable device.

    I am gonna order one right now. You're about to see an order pop up lol. Can you please answer my unorganized sporadic questions? I appreciate it.

  5. #5
    Join Date
    Sep 2006
    Location
    TN
    Age
    39
    Posts
    4,976
    Post Thanks / Like
    Rep Power
    20

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    Quote Originally Posted by CleverDouchebag View Post
    Hmmmm... I can see your point. I do see the gel becoming a problem with slippage.

    I also do not like those plastic niches portruding out. But it does seem to help with the idea of creating more girth inside the well.

    Just to reiterate my question. One thing that I WASN'T doing with the Bib hanger was tightening and pushing to form those shoulders or anchor spot whatever you folks call it. That is probably the main contributor to my injury.

    My erect girth right now stands at 5.0 inches and is a little thinner behind the coronal ridge. Will I be able to use the same amount of wrap as you? Or would I have to use more? With the Malehanger of course.

    Also, like I have previously mentioned, I am uncut and am wondering if I can use your method without the slippage issues I had with bib. Of course, just about everything was wrong when I was using it but visually seeing the malehanger and how it was applied, it seems like a more comfortable device.

    I am gonna order one right now. You're about to see an order pop up lol. Can you please answer my unorganized sporadic questions? I appreciate it.
    You'd follow my guide where I lay out how to wrap if the suggestions in there don't work, we would work together and fine tune your fit. I have many uncut guys who use my hanger with no problems. Typically, you place the hanger just like a cut guy would and tighten. Some men need to modify things slightly....sitting the hanger a little farther back, or rolling their foreskin back as examples.

    I have your order and it ships tomorrow with some others.
    Owner/Designer Of Malehanger Penis Hanger

    Keepin' It Real Since 1999

    Buy MaleHanger HERE $49.99+Shipping Ships Worldwide!

  6. #6
    Join Date
    Aug 2016
    Location
    UK
    Posts
    26
    Post Thanks / Like
    Rep Power
    0

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    Cool. It arrives on my birthday which is pretty cool.

    Already have my wraps good to go and have practiced a little bit. I read your how to and am glad to see everything simplified. Bib is cool and gives a lot of good advice. Just it seems a little over the top and many complexities. Just a little thing that bothered me, but again, I ain't talking shit.

    Leave my foreskin covering the glans. That is what I understood so I will be going with this method and follow everything else as outlined. The "anchor" will be formed regardless of more skin right? Just a thing that concerns me but I'll play around with it when it comes tomorrow.

    One more thing. The "TPD" you constructed looks like a better alternative to the regular clamps. When I did try clamping with the plastic clamps, my fat pad would push the clamp and wasn't really seated against the pubic bone. Right now I really want to get to at least 9.0 BPEL first. But if hanging and clamping can be done uniformly, I would be interested in a routine like that once I am ready.

    Where can we order the TPD?

  7. #7
    Join Date
    Sep 2006
    Location
    TN
    Age
    39
    Posts
    4,976
    Post Thanks / Like
    Rep Power
    20

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    My clamp device I only sell on my support forum. malehanger3.boards.net under "Penis Clamp".
    Typically, you would hang, then clamp to keep post clamp swelling from affecting hanger fit.
    Owner/Designer Of Malehanger Penis Hanger

    Keepin' It Real Since 1999

    Buy MaleHanger HERE $49.99+Shipping Ships Worldwide!

  8. #8
    Join Date
    Aug 2016
    Location
    UK
    Posts
    26
    Post Thanks / Like
    Rep Power
    0

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    So far so good. Seems like a good product.

    I saw your vid on attatching the hanger on your how to section. You said the process should take 3 to 5 mins. Only took me about 1 or 1.5 mins. The top teeth closed a lot quicker for mine than yours due to your girth most likely.

    What would happen if I decide to make both my wraps just one inch longer? I feel like I need just slightly more wrapped girth. I'll try it out.

    Also, you mentioned to take off the hanger after 5 mins of hanging to re tighten but it looked like my top teeth closed all the way before hanging. So probably a little more wrap is needed. I am 5.0 erect midgirth. I am probably overthinking shit. But it feels way better than the starter from what I remember.

    Should start a progress log huh?

  9. #9
    Join Date
    Sep 2006
    Location
    TN
    Age
    39
    Posts
    4,976
    Post Thanks / Like
    Rep Power
    20

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    Damn mobile browser makes it too easy to delete posts you just posted.

    I think you mis heard me. I don't say to remove the hanger after the first few minutes of a set, only to tighten the hanger more because fluid in the skin is pushed out allowing for more tightening. Experiment with different amounts of wrap. My suggestions in my guide are not carved in stone law. Rather suggestions to get a guy going.
    Owner/Designer Of Malehanger Penis Hanger

    Keepin' It Real Since 1999

    Buy MaleHanger HERE $49.99+Shipping Ships Worldwide!
    Likes CleverDouchebag liked this post

  10. #10
    Join Date
    Aug 2016
    Location
    UK
    Posts
    26
    Post Thanks / Like
    Rep Power
    0

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    Yeah my bad I did not mean to type take off the hanger rather than to take off the weight and then retighten. That's what I was trying to do but like I said I may need more wrap.

    It's all good. Right now is the technique period. This may very well bring the gains I've been wanting to have for a long time as well with the TPD.

  11. #11
    Join Date
    Sep 2006
    Location
    TN
    Age
    39
    Posts
    4,976
    Post Thanks / Like
    Rep Power
    20

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    There's no need to remove the weight either. Just reach down, turn the wing nut. Yes, there is a learning phase. I am here for ya.
    Owner/Designer Of Malehanger Penis Hanger

    Keepin' It Real Since 1999

    Buy MaleHanger HERE $49.99+Shipping Ships Worldwide!

  12. #12
    Join Date
    Jun 2005
    Posts
    1,503
    Post Thanks / Like
    Rep Power
    13

    Re: Bib starter vs. MaleHanger & Hanging advice Please


  13. #13
    Join Date
    Aug 2009
    Posts
    1,026
    Post Thanks / Like
    Rep Power
    9

    Re: Bib starter vs. MaleHanger & Hanging advice Please

    As someone whos used both, the MH is better, the bib is good, but that rubber shit is annoying, you'd think it was good but it just messes the tightening process, also wayyy to expensive. For the price and quality, you cant beat the MH period!
    start 6x4.5 now 7x5 thanks DLD, RED, and STILL!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •