Bathmate spare parts and lack of "suction "🪠.

LONGERDICK7+ · Jan 11, 2024

Today I had a BM session didn't feel enough suction.Can the upper valve gets damaged or maybe the O' rings.Can the small lever inside gets worn out I noticed it leaks water too.Im going to continue with the BM sessions.It doesn't feel as good as its used to.But I think I still can get gains..

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Today I had a BM session didn't feel enough suction.Can the upper valve gets damaged or maybe the O' rings.Can the small lever inside gets worn out I noticed it leaks water too.Im going to continue with the BM sessions.It doesn't feel as good as its used to.But I think I still can get gains..

If the valve leaks. You need to buy a replacement valve and change it out.

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
rings.Can the small lever inside gets worn out I noticed it leaks water too.

Yes! This happens with time. I was forced to replace my valve on my HydroExtreme 9. It came broken.

I have a video somewhere of a similar problem I had before when I got my HydroExtreme 9. Do you want me to find that video?

squirt_inducer_man · Jan 11, 2024

Here is the video. The small lever wouldn't stick, so the water was leaking out.
View attachment VID_20221111_212925.mp4

Screenshot_2024-01-11-14-41-17-31_ab7988c7b00b15bc78ec5a428c58236f.jpg

LONGERDICK7+ · Jan 11, 2024

Mine doesn't pop like that,I'd say that it works almost ok.I think can gain even if it doesn't work at its fullest extent.But I would like to buy a mityvac too..😬

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Mine doesn't pop like that,I'd say that it works almost ok.I think can gain even if it doesn't work at its fullest extent.But I would like to buy a mityvac too..😬

It should stay to the side when you fill the cylinder with water.

LONGERDICK7+ · Jan 11, 2024

squirt_inducer_man said:
It should stay to the side when you fill the cylinder with water.

Yep it does stay to the side.although it still leaks water if I turn it upside down.Even when the valve is closed.. I'll have another session tonight and I'll recheck it tonight..

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Yep it does stay to the side.although it still leaks water if I turn it upside down.Even when the valve is closed.. I'll have another session tonight and I'll recheck it tonight..

I believe you need to change the valve. Bathme have replacement valves. They are not hard to replace.

LONGERDICK7+ · Jan 11, 2024

Do you think I won't get gains if I keep on using whit that leakage? I feel the vacuuming anyway

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Do you think I won't get gains if I keep on using whit that leakage? I feel the vacuuming anyway

If you can keep the vaccum after you have filled the pump ot should work.

LONGERDICK7+ · Jan 11, 2024

squirt_inducer_man said:
If you can keep the vaccum after you have filled the pump ot should work.

Yep it actually does. I'll continue with the routine thanks

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Yep it actually does. I'll continue with the routine thanks

No problem. Maybe Bathmate can send a replacement valve to ypu for free?

LONGERDICK7+ · Jan 11, 2024

squirt_inducer_man said:
No problem. Maybe Bathmate can send a replacement valve to ypu for free?

Nah I don't think they will,it's an older version.Warranty is expired imo.

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Nah I don't think they will,it's an older version.Warranty is expired imo.

okay. I hope the valve for it can be replaced.

LONGERDICK7+ · Jan 11, 2024

Yep I'd like to save cash buy a LM,a Mityvac
And a few tools more.It would take a while.
😂

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Yep I'd like to save cash buy a LM,a Mityvac
And a few tools more.It would take a while.
😂

Okay. A valve replacement do not cost much, that is: If they use the same type of valve now on the new pumps. Either way they should be able to help you if you want to.

Or just mount a cork from a VacuVin pump, instead of the orginal valve. Either way there is a way to get a monster girth with Bathmate.

LONGERDICK7+ · Jan 11, 2024

Vacu vin pump?

squirt_inducer_man · Jan 11, 2024

LONGERDICK7+ said:
Vacu vin pump?

Yeah! There is a modification you can do to the pump, to get more pressure/vaccum. I tried it on my Hydromax 5 and it worked great.

Here is my version of the modification. It involved removing the original valve. I found out later that you didn't need to remove the valve (🔗 look here). But maybe this will work for you if you.

Bathmate mod

here is an extremely easy way i have been using this for many years just attach a piece of a thicker sleeve to the end of the vacu vin i have tape holding it because it's a bit short and comes off without the tape You don't use the vacu vin cork?

mattersofsize.com

I suggest that you read through this entire thread to learn about this mod.

Kind regards.

DLD · Jan 12, 2024

LONGERDICK7+ said:
Mine doesn't pop like that,I'd say that it works almost ok.I think can gain even if it doesn't work at its fullest extent.But I would like to buy a mityvac too..😬

Get the Mityvac and forget the bathmate problems

LONGERDICK7+ · Jan 12, 2024

DLD said:
Get the Mityvac and forget the bathmate problems

Ok I'll buy that n modify it

Bathmate spare parts and lack of "suction "🪠.

Active Member

Administrator

Administrator

Administrator

Active Member

Administrator

Active Member

Administrator

Active Member

Administrator

Active Member

Administrator

Active Member

Administrator

Active Member

Administrator

Active Member

Administrator

doublelongdaddy

Active Member

Similar threads