I am 64 years old, and in the process of checking and wanting to increase my sex drive - thinking mainly of testosterone - I was diagnosed as having a moderate prostate cancer. Got radiated 1 1/2 years ago and it looks like it is gone. In with the PSA blood tests to keep a look out for cancer, I got testosterone checks. Boy they were low and sinking. I think the first was 240, and most recently 180!!
I read this forum most days and came across someone asking about some company called X-40 Labs. I looked at the site and ended up ordering the product Tribuloid, that claimed to boost testosterone.
At the same time, I got out the ROP that I had made a few years ago, and based on someone's thread here that actually had seen a testosterone boost apparently from the ROP, decided to wear it a lot.
I just got lab results from a few days ago and am I happy. Finally testosterone is on the way UP! 300 Not what I want but I am hopeful for further improvement. Two Tribuloid a day and the ROP for maybe 5 hours a day. One or both of them worked.
Now I have for some time wanted to mention how I made my ROP. I got a piece of copper and the zinc rod from McMaster-Carr and a bit of (I think) neoprene tubing from them also. The tubing is 3/16" diameter with 1/32" wall and is black and quite soft - so very stretchable. I wish I could tell you the part number but this is from years ago. I could never get the original design - tubing over the ends of the rods - to work well so I changed it. Drilled 1/4" holes through the two rods (which are about 2" long) very near the ends. Rounded off everything including the entry to each hole. Put the tubing through the holes so as to hold the rods next to each other, and tied a knot. It is very easy to adjust the tension by changing the position of the knot, and doesn't need much adjusting since the tubing is very flexible. For instance, when it is sitting on my desk the rods are about 1/8 " apart, but to put it on I pull the rods nearly 4" apart with not much effort. I use no lotion, because it usually will cause early failure of the tubing, and I do not shave down there. If placed carefully, I wear it without noticing that it is place. Occasionally, I have to pull on the various bits o ease pulling at a hair, and sometimes I do pull a few hairs out when removing it.
I hope that I have written in an understandable way. I am quite groggy this morning because of a bit of a happy champagne drinking last evening.
I read this forum most days and came across someone asking about some company called X-40 Labs. I looked at the site and ended up ordering the product Tribuloid, that claimed to boost testosterone.
At the same time, I got out the ROP that I had made a few years ago, and based on someone's thread here that actually had seen a testosterone boost apparently from the ROP, decided to wear it a lot.
I just got lab results from a few days ago and am I happy. Finally testosterone is on the way UP! 300 Not what I want but I am hopeful for further improvement. Two Tribuloid a day and the ROP for maybe 5 hours a day. One or both of them worked.
Now I have for some time wanted to mention how I made my ROP. I got a piece of copper and the zinc rod from McMaster-Carr and a bit of (I think) neoprene tubing from them also. The tubing is 3/16" diameter with 1/32" wall and is black and quite soft - so very stretchable. I wish I could tell you the part number but this is from years ago. I could never get the original design - tubing over the ends of the rods - to work well so I changed it. Drilled 1/4" holes through the two rods (which are about 2" long) very near the ends. Rounded off everything including the entry to each hole. Put the tubing through the holes so as to hold the rods next to each other, and tied a knot. It is very easy to adjust the tension by changing the position of the knot, and doesn't need much adjusting since the tubing is very flexible. For instance, when it is sitting on my desk the rods are about 1/8 " apart, but to put it on I pull the rods nearly 4" apart with not much effort. I use no lotion, because it usually will cause early failure of the tubing, and I do not shave down there. If placed carefully, I wear it without noticing that it is place. Occasionally, I have to pull on the various bits o ease pulling at a hair, and sometimes I do pull a few hairs out when removing it.
I hope that I have written in an understandable way. I am quite groggy this morning because of a bit of a happy champagne drinking last evening.
