turbo Bathmate

I have been doing Penis Enlargement on and off since about 1999. I have in that time lengthened my penis from 5" or so to 7.7"(BPenis EnlargementL). The last great change has occurred thanks to the Bathmate as I have enhanced it. It appears that I am gaining something like .3" per month which is astonishing in my experience.

I do not suggest the following is good even for most people. I will first give a little history to indicate how conditioned my penis is to strong measures.

In my mid fifties the first hints of Penis Enlargement became available on the internet. I am quite an experimenter and suffered as many do from feeling that my penis was too small. I started with 1.5 lbs. of lead shot in a cloth bag hanging from my dick for 45 minutes most mornings. In a couple months I had gained .1"+ per month and realized this stuff works. Over the years the weights steadily increased. If I recall something like 10 lbs. I had gotten to just under 7" when I was radiated for prostate cancer. This shrinks the prostate which surrounds the urethra and I lost .2 to .3".

Over the years I had taken time off when other things needed my mental energy more. My penis had become darker permanently with a few spots never seeming to go away. It was worth it.

A few years ago I got very serious with weights. I had to invent ways using leather and rawhide things to hold onto to my dick as the weights increased. I found If I got just the right amount of erection and put the straps a ways down it that I could got to 20-25 lbs. for 15 minutes. It was slow and sometimes painful but I managed to get back to 7" over a period of 6 months if I remember correctly.

The discount on the Bathmate intrigued me (and we had a little more money) and I bought one. Long ago I had tried water in a vacuum cylinder and found it interesting but left it go. About 5 years ago I tried a commercial vacuum pump cylinder and found it moderately effective. I always ended up using higher than recommended vacuum. My penis was becoming quite tough by this time.

So I used the Bathmate for a month or so this summer. Sitting at my desk watching ����. I used it with a personal lubricant jelly smeared on the comfort pad to help seal it. It worked okay but I felt I could stand more intensity. I had immediately started the stretches pulling on the Bathmate.

Now for the latest. I drilled and tapped a hole near the top of the Bathmate tube. Put in a plastic fitting, and using 1/8" I.D. tubing connected this through a one way valve to a plastic syringe. Over the years I have designed many different things and so these parts were right in my shop. Just today I added a vacuum gauge to be able to report more accurately my routine.

I use quite hot water, enter as erect as I can (95%) over the toilet, and pump to hold the 4" of mercury that the Bathmate delivers. I go to my home desk, pump again a bit using the Bathmate valve. Then I add the syringe. I pull on the syringe to get to about 8" Hg. and start pulling on the Bathmate as hard as my hand can manage. I hold tension perhaps 30-70% of the time I am in the Bathmate. After holding tension a minute or so, I push into the Bathmate and suck more water out with the syringe. Then pull again. I repeat this for 16-18 minutes. The value of the vacuum I use slowly increases to 15+"Hg. Of course when pulling the value rises a couple inches.

So after expecting that my penis had gotten so toughened that I couldn't gain more than .06"/month, I am now in the happy position of the most rapid gains I have experienced. This is taking one session of 16-18 minutes a day.

Excellent work. Is there any way you can post pictures and directions?

I hope that I can post the picture correctly.

What it shows is the little white 90 degree elbow fitting near the top of the scale of the Bathmate with a tube running down the side to a tywrap (to prevent stress on the fitting). Then there is a tee fitting that I added today to connect the gauge - it has a 1 foot long tube on it with a fitting at the end but is not shown. A few inches further along is the plastic one way valve, then 6 inches or so to the syringe. Don't be confused that the plunger end of the syringe is next to the fitting into the Bathmate. That is just the way they lay on the bench to take the picture.

The syringe is available online many places by Googling "plastic syringe" for a couple bucks. The fittings and hose are available online from McMaster-Carr. 1/8" inside diameter tubing, barbed fittings to suit, with the one into the Bathmate being 10-32 thread. Threading the plastic tube takes patience.

This is not an easy task for many members, and it should only be used by very experienced members anyway. I had not bothered to post many of the contraptions that I had devised over the years to hang weights, simply because they were not for the unskilled to make, nor for the inexperienced to use.

I show this to supply further knowledge about what works REALLY well, and to help the future of Penis Enlargement which has enhanced my life considerably.

By the way as for the temporary effects on my penis... At first there was considerable water retention that lasted a few hours, and multiple red marks up to .3" diameter. It all looked pretty ugly. Within a few weeks the mark went away and never occurred elsewhere, and today there was no water retention below the head.

By the way, the metal band and wire arrangement near the tyrwap is something that I am working on to save my arthritis, by clipping the wire to something to allow me to apply pulling force to the Bathmate without using my thumbs.

Thanks allot for sharing your vast wisdom and experience. I would like to modify my Bathmate like this one day and would enable me to take it to another level. I agree though that it isn't really for newer users, especially at that level of pressure.

You get gain the same increased pressure with the winevac without having to modify your Bathmate.

I think the winevac a great idea, but have you actually measured the vacuum capability? Me, I am not bothered about modifying the Bathmate. One advantage of the syringe is that the water in the syringe gets emptied into a glass. Perhaps tidier?

Another mod I did early on, that I had to do with the air vacuum cylinder I used, was to add some foam pads inside to keep the head of my penis from being squashed against one side of the cylinder. A pain to do but worthwhile to me.

itsme;461256 said:

I think the winevac a great idea, but have you actually measured the vacuum capability? Me, I am not bothered about modifying the Bathmate. One advantage of the syringe is that the water in the syringe gets emptied into a glass. Perhaps tidier?

Another mod I did early on, that I had to do with the air vacuum cylinder I used, was to add some foam pads inside to keep the head of my penis from being squashed against one side of the cylinder. A pain to do but worthwhile to me.

Click to expand...

very interesting.
how did you fit the foam pads inside?
do you think they add in less bruises for the dick?
I always think that its not good that my dick is pressed along the shaft to the left side of the Bathmate.(I have a small peyronies lump and left angle)

The pads in mine are a firm closed cell plastic foam that is used for packaging. Cut 3/8" thick x 3/4" wide by 3" long. A couple spots of superglue on the back. Put into place with a long needle nose pliers. Used a 1" diameter stick to press it flat (the foam will want to stay straight) so the glue could cure between the foam and cylinder for a minute or so. The spot where they are to be placed must be very clean. This is a real pain ITA! You might do better with adhesive backed material. Look for it at http://www.mcmaster.com.

I don't know about bruising, but any part of the penis flattened against the inside of the cylinder isn't going to get expanded.

By the way, I found that how I held the Bathmate when putting it on made a difference which way my dick pointed inside the cylinder. Put on with my right hand, therefore the cylinder angling slightly to the right, my penis hit the right side. Put on with my left hand, the Bathmate angled slightly to the left, it hit the left side. Not obvious why, but that is what happens with me.

Excellent! Thanks for the pictures and the modification, another great accomplishment at MOS.

I don't know about bruising, but any part of the penis flattened against the inside of the cylinder isn't going to get expanded.

Click to expand...

Interesting. Is this a fact?

Not sure of your question. Is what a fact?

Hi DLD, I am not getting email notifications. Can you look into this?

And being a rude bas***d (never intentional) I forgot to thank everyone for their nice compliments. Thanks.

itsme;461476 said:

Hi DLD, I am not getting email notifications. Can you look into this?

And being a rude bas***d (never intentional) I forgot to thank everyone for their nice compliments. Thanks.

Click to expand...

Through the forum?

You should be good now.